This dataset contains Daily Snow Cover Fraction of viewable snow from AVHRR, produced by the Snow project of the ESA Climate Change Initiative programme. Snow cover fraction viewable (SCFV) indicates the area of snow viewable from space over land surfaces. In forested areas this refers to snow viewable on top of the forest canopy. The SCFV is given in percentage (%) per pixel. The global SCFV product is available at about 5 km pixel size for all land areas, excluding Antarctica and Greenland ice sheets. The coastal zones of Greenland are included. The SCFV time series provides daily products for the period 1982-2018. The product is based on medium resolution optical satellite data from the Advanced Very High Resolution Radiometer (AVHRR). Clouds are masked using the Cloud CCI cloud v3.0 mask product. The retrieval method of the snow_cci SCFV product from AVHRR data has been further developed and improved based on the ESA GlobSnow approach described by Metsämäki et al. (2015) and complemented with a pre- and post-classification module. All cloud free pixels are then used for the snow extent mapping, using spectral bands centred at about 0.630 µm and 1.61 µm (channel 3a or the reflective part of channel 3b (ref3b)), and an emissive band centred at about 10.8 µm. The snow_cci snow cover mapping algorithm is a three-step approach: first, a strict pre-classification is applied to identify all cloud free pixels which are certainly snow free. For all remaining pixels, the snow_cci SCFV retrieval method is applied. Finally, a post-processing removes erroneous snow pixels caused either by falsely classified clouds in the tropics or by unreliable ref3b values at a global scale. The following auxiliary data set is used for product generation: ESA CCI Land Cover from 2000; water bodies and permanent snow and ice areas are masked based on this dataset. Both classes were separately aggregated to the pixel spacing of the SCF product. Water areas are masked if more than 50 percent of the pixel is classified as water; permanent snow and ice areas are masked if more than 50 percent are identified as such areas in the aggregated map. The SCFV product is aimed to serve the needs for users working in the cryosphere and climate research and monitoring activities, including the detection of variability and trends, climate modelling and aspects of hydrology, meteorology and biology. The Remote Sensing Research Group of the University of Bern is responsible for the SCFV product development and generation. ENVEO developed and prepared all auxiliary data sets used for the product generation. The SCFV AVHRR product comprises one longer data gap of 92 between November 1994 and January 1995, and 16 individual daily gaps, resulting in a 99% data coverage over the entire study period of 37 years.

This dataset contains Daily Snow Cover Fraction (snow on ground) from MODIS, produced by the Snow project of the ESA Climate Change Initiative programme. Snow cover fraction on ground (SCFG) indicates the area of snow observed from space on land surfaces, in forested areas corrected for the transmissivity of the forest canopy. The SCFG is given in percentage (%) per pixel. The global SCFG product is available at about 1 km pixel size for all land areas, excluding Antarctica and Greenland ice sheets. The coastal zones of Greenland are included. The SCFG time series provides daily products for the period 2000 – 2020. The SCFG product is based on Moderate resolution Imaging Spectroradiometer (MODIS) data on-board the Terra satellite. The retrieval method of the Snow_cci SCFG product from MODIS data has been further developed and improved based on the ESA GlobSnow approach described by Metsämäki et al. (2015) and complemented with a pre-classification module developed by ENVEO. For the SCFG product generation from MODIS, multiple reflective and emissive spectral bands are used. In a first step, clouds are masked using an adapted version of the Simple Cloud Detection Algorithm version 2.0 (SCDA2.0) (Metsämäki et al., 2015). All cloud free pixels are then used for the snow extent mapping, using spectral bands centred at about 0.55 µm and 1.6 µm, and an emissive band centred at about 11 µm. The Snow_cci snow cover mapping algorithm is a two-step approach: first, a strict pre-classification is applied to identify all cloud free pixels which are certainly snow free. For all remaining pixels, the snow_cci SCFG retrieval method is applied. The main differences of the Snow_cci snow cover mapping algorithm compared to the GlobSnow algorithm described in Metsämäki et al. (2015) are (i) improvements of the cloud screening approach applicable on a global scale, (ii) the pre-classification of snow free areas on global land areas, (iii) the usage of spatially variable background reflectance and forest reflectance maps instead of global constant values for snow free land and forest, (iv) the update of the constant value for wet snow based on analyses of spatially distributed reflectance time series of MODIS data, and (v) the update of the global forest canopy transmissivity based on forest density from Hansen et al. (2013) and forest type layers from Land Cover CCI (Defourny, 2019) to assure in forested areas consistency of the SCFG and the SCFV CRDP v2.0 from MODIS data (https://catalogue.ceda.ac.uk/uuid/ebe625b6f77945a68bda0ab7c78dd76b) using the same retrieval approach. Improvements of the Snow_cci SCFG version 2.0 compared to the Snow_cci version 1.0 include (i) the utilisation of an updated background reflectance map derived from statistical analyses of an extended MODIS time series, (ii) an update of the forest canopy transmissivity map, and (iii) an update of the constant reflectance value for wet snow based on the analysis of time series of the MODIS reflectance at 0.55 µm. Permanent snow and ice, and water areas are masked based on the Land Cover CCI data set of the year 2000. Both classes were separately aggregated to the pixel spacing of the SCFG product. Water areas are masked if more than 30 percent of the pixel is classified as water, permanent snow and ice areas are masked if more than 50 percent are identified as such areas in the aggregated map. The product uncertainty for observed land pixels is provided as unbiased root mean square error (RMSE) per pixel in the ancillary variable. The SCFG product is aimed to serve the needs for users working in the cryosphere and climate research and monitoring activities, including the detection of variability and trends, climate modelling and aspects of hydrology, meteorology, and biology. ENVEO is responsible for the SCFG product development and generation from MODIS data, SYKE supported the development. There are a few days without any MODIS acquisitions in the years 2000, 2001, 2002, 2003, 2008, 2016 and 2018. On several days in the years 2000 to 2006, and on a few days in the years 2012, 2015 and 2016, the acquired MODIS data have either only limited coverage, or some of the MODIS data were corrupted during the download process. For these days, the SCFG products are available but have data gaps.

This dataset contains Daily Snow Cover Fraction (snow on ground) from AVHRR, produced by the Snow project of the ESA Climate Change Initiative programme. Snow cover fraction on ground (SCFG) indicates the area of snow observed from space over land surfaces, in forested areas corrected for the transmissivity of the forest canopy. The SCFG is given in percentage (%) per pixel. The global SCFG product is available at about 5 km pixel size for all land areas, excluding Antarctica and Greenland ice sheets. The coastal zones of Greenland are included. The SCFG time series provides daily products for the period 1982-2018. The product is based on medium resolution optical satellite data from the Advanced Very High Resolution Radiometer (AVHRR). Clouds are masked using the Cloud CCI cloud v3.0 mask product. The retrieval method of the snow_cci SCFG product from AVHRR data has been further developed and improved based on the ESA GlobSnow approach described by Metsämäki et al. (2015) and complemented with a pre-classification module. All cloud free pixels are then used for the snow extent mapping, using spectral bands centred at about 0.63 µm and 1.61 µm (channel 3a or the reflective part of channel 3b (ref3b)), and an emissive band centred at about 10.8 µm. The snow_cci snow cover mapping algorithm is a three-step approach: first, a strict pre-classification is applied to identify all cloud free pixels which are certainly snow free. For all remaining pixels, the snow_cci SCFG retrieval method is applied. Finally, a post-processing removes erroneous snow pixels caused either by falsely classified clouds in the tropics or by unreliable ref3b values at a global scale. The following auxiliary data sets are used for product generation: i) ESA CCI Land Cover from 2000; water bodies and permanent snow and ice areas are masked based on this dataset. Both classes were separately aggregated to the pixel spacing of the SCF product. Water areas are masked if more than 50 percent of the pixel is classified as water, permanent snow and ice areas are masked if more than 50 percent are identified as such areas in the aggregated map; ii) Forest canopy transmissivity map; this layer is based on the tree cover classes of the ESA CCI Land Cover 2000 data set and the tree cover density map from Landsat data for the year 2000 (Hansen et al., Science, 2013, DOI: 10.1126/science.1244693). This layer is used to apply a forest canopy correction and estimate in forested areas the fractional snow cover on ground. The SCFG product is aimed to serve the needs of users working in cryosphere and climate research and monitoring activities, including the detection of variability and trends, climate modelling and aspects of hydrology, meteorology, and biology. The Remote Sensing Research Group of the University of Bern is responsible for the SCFG product development and generation. ENVEO developed and prepared all auxiliary data sets used for the product generation. The SCFG AVHRR product comprises one longer data gap of 92 between November 1994 and January 1995, and 16 individual daily gaps, resulting in a 99% data coverage over the entire study period of 37 years.

This dataset contains Daily Snow Cover Fraction of viewable snow from the MODIS satellite instruments, produced by the Snow project of the ESA Climate Change Initiative programme. Snow cover fraction viewable (SCFV) indicates the area of snow viewable from space over all land surfaces. In forested areas this refers to snow viewable on top of the forest canopy. The SCFV is given in percentage (%) per pixel. The global SCFV product is available at about 1 km pixel size for all land areas, excluding Antarctica and Greenland ice sheets. The coastal zones of Greenland are included. The SCFV time series provides daily products for the period 2000 – 2020. The SCFV product is based on Moderate resolution Imaging Spectroradiometer (MODIS) data on-board the Terra satellite. The retrieval method of the Snow_cci SCFV product from MODIS data has been further developed and improved based on the ESA GlobSnow approach described by Metsämäki et al. (2015) and complemented with a pre-classification module developed by ENVEO. For the SCFV product generation from MODIS, multiple reflective and emissive spectral bands are used. In a first step, clouds are masked using an adapted version of the Simple Cloud Detection Algorithm version 2.0 (SCDA2.0) (Metsämäki et al., 2015). All cloud free pixels are then used for the snow extent mapping, using spectral bands centred at about 0.55 µm and 1.6 µm, and an emissive band centred at about 11 µm. The snow_cci snow cover mapping algorithm is a two-step approach: first, a strict pre-classification is applied to identify all cloud free pixels which are certainly snow free. For all remaining pixels, the Snow_cci SCFV retrieval method is applied. The main differences of the Snow_cci snow cover mapping algorithm compared to the GlobSnow algorithm described in Metsämäki et al. (2015) are (i) improvements of the cloud screening approach applicable on a global scale, (ii) the pre-classification of snow free areas on global land areas, (iii) the adaptation of the retrieval method using of a spatially variable ground reflectance instead of global constant values for snow free land, (iv) the update of the constant value for wet snow based on analyses of spatially distributed reflectance time series of MODIS data to assure in forested areas consistency of the SCFV and the SCFG CRDP v2.0 from MODIS data (https://catalogue.ceda.ac.uk/uuid/ebe625b6f77945a68bda0ab7c78dd76b) using the same retrieval approach. Improvements of the Snow_cci SCFV version 2.0 compared to the Snow_cci version 1.0 include (i) the utilisation of an updated ground reflectance map derived from statistical analyses of an extended MODIS time series, (ii) an update of the forest mask used for the transmissivity estimation, and (iii) an update of the constant reflectance value for wet snow based on the analysis of time series of the MODIS reflectance at 0.55 µm. Permanent snow and ice, and water areas are masked based on the Land Cover CCI data set of the year 2000. Both classes were separately aggregated to the pixel spacing of the SCFV product. Water areas are masked if more than 30 percent of the pixel is classified as water, permanent snow and ice areas are masked if more than 50 percent are identified as such areas in the aggregated map. The product uncertainty for observed land pixels is provided as unbiased root mean square error (RMSE) per pixel in the ancillary variable. The SCFV product is aimed to serve the needs for users working in the cryosphere and climate research and monitoring activities, including the detection of variability and trends, climate modelling and aspects of hydrology, meteorology, and biology. ENVEO is responsible for the SCFV product development and generation from MODIS data, SYKE supported the development. There are a few days without any MODIS acquisitions in the years 2000, 2001, 2002, 2003, 2008, 2016 and 2018. On several days in the years 2000 to 2006, and on a few days in the years 2012, 2015 and 2016, the acquired MODIS data have either only limited coverage, or some of the MODIS data were corrupted during the download process. For these days, the SCFV products are available but have data gaps.

This dataset contains Daily Snow Cover Fraction (snow on ground) from MODIS, produced by the Snow project of the ESA Climate Change Initiative programme. Snow cover fraction on ground (SCFG) indicates the area of snow observed from space on land surfaces, in forested areas corrected for the transmissivity of the forest canopy. The SCFG is given in percentage (%) per pixel. The global SCFG product is available at about 1 km pixel size for all land areas, excluding Antarctica and Greenland ice sheets. The coastal zones of Greenland are included. The SCFG time series provides daily products for the period 2000 – 2019. The SCFG product is based on Moderate resolution Imaging Spectroradiometer (MODIS) data on-board the Terra satellite. The retrieval method of the snow_cci SCFG product from MODIS data has been further developed and improved based on the ESA GlobSnow approach described by Metsämäki et al. (2015) and complemented with a pre-classification module developed by ENVEO. For the SCFG product generation from MODIS, multiple reflective and emissive spectral bands are used. In a first step, clouds are masked using an adapted version of the Simple Cloud Detection Algorithm version 2.0 (SCDA2.0) (Metsämäki et al., 2015). All cloud free pixels are then used for the snow extent mapping, using spectral bands centred at about 550 nm and 1.6 µm, and an emissive band centred at about 11 µm. The snow_cci snow cover mapping algorithm is a two-step approach: first, a strict pre-classification is applied to identify all cloud free pixels which are certainly snow free. For all remaining pixels, the snow_cci SCFG retrieval method is applied. Improvements to the GlobSnow algorithm implemented for snow_cci version 1 include (i) the utilisation of background and forest reflectance maps derived from statistical analyses of MODIS time series replacing the constant values for snow free ground and snow free forest used in the GlobSnow approach, and (ii) the usage of a global forest transmissivity map developed and created within snow_cci based on forest density from Hansen et al. (2013) and forest type layers from Land Cover CCI (Defourny, 2019). The forest transmissivity map is used to account for the shading effects of the forest canopy and estimate also in forested areas the fractional snow cover on ground. Permanent snow and ice, and water areas are masked based on the Land Cover CCI data set of the year 2000. Both classes were separately aggregated to the pixel spacing of the SCFG product. Water areas are masked if more than 30 percent of the pixel is classified as water, permanent snow and ice areas are masked if more than 50 percent are identified as such areas in the aggregated map. The product uncertainty for observed land pixels is provided as unbiased root mean square error (RMSE) per pixel in the ancillary variable. The SCFG product is aimed to serve the needs for users working in the cryosphere and climate research and monitoring activities, including the detection of variability and trends, climate modelling and aspects of hydrology, meteorology, and biology. ENVEO is responsible for the SCFG product development and generation from MODIS data, SYKE supported the development. There are a few days without any MODIS acquisitions in the years 2000, 2001, 2002, 2003, 2008, 2016 and 2018. On several days in the years 2000 to 2006, and on a few days in the years 2012, 2015 and 2016, the acquired MODIS data have either only limited coverage, or some of the MODIS data were corrupted during the download process. For these days, the SCFG products are available but have data gaps.

This dataset contains Daily Snow Cover Fraction of viewable snow from the MODIS satellite instruments, produced by the Snow project of the ESA Climate Change Initiative programme. Snow cover fraction viewable (SCFV) indicates the area of snow viewable from space over all land surfaces. In forested areas this refers to snow viewable on top of the forest canopy. The SCFV is given in percentage (%) per pixel. The global SCFV product is available at about 1 km pixel size for all land areas, excluding Antarctica and Greenland ice sheets. The coastal zones of Greenland are included. The SCFV time series provides daily products for the period 2000 – 2019. The SCFV product is based on Moderate resolution Imaging Spectroradiometer (MODIS) data on-board the Terra satellite. The retrieval method of the snow_cci SCFV product from MODIS data has been further developed and improved based on the ESA GlobSnow approach described by Metsämäki et al. (2015) and complemented with a pre-classification module developed by ENVEO. For the SCFV product generation from MODIS, multiple reflective and emissive spectral bands are used. In a first step, clouds are masked using an adapted version of the Simple Cloud Detection Algorithm version 2.0 (SCDA2.0) (Metsämäki et al., 2015). All cloud free pixels are then used for the snow extent mapping, using spectral bands centred at about 550 nm and 1.6 µm, and an emissive band centred at about 11 µm. The snow_cci snow cover mapping algorithm is a two-step approach: first, a strict pre-classification is applied to identify all cloud free pixels which are certainly snow free. For all remaining pixels, the snow_cci SCFV retrieval method is applied. Improvements to the GlobSnow algorithm implemented for snow_cci version 1 include (i) the utilisation of a background reflectance map derived from statistical analyses of MODIS time series replacing the constant values for snow free ground used in the GlobSnow approach, and (ii) the adaptation of the retrieval method for mapping in forested areas the SCFV. Permanent snow and ice, and water areas are masked based on the Land Cover CCI data set of the year 2000. Both classes were separately aggregated to the pixel spacing of the SCFV product. Water areas are masked if more than 30 percent of the pixel is classified as water, permanent snow and ice areas are masked if more than 50 percent are identified as such areas in the aggregated map. The product uncertainty for observed land pixels is provided as unbiased root mean square error (RMSE) per pixel in the ancillary variable. The SCFV product is aimed to serve the needs for users working in the cryosphere and climate research and monitoring activities, including the detection of variability and trends, climate modelling and aspects of hydrology, meteorology, and biology. ENVEO is responsible for the SCFV product development and generation from MODIS data, SYKE supported the development. There are a few days without any MODIS acquisitions in the years 2000, 2001, 2002, 2003, 2008, 2016 and 2018. On several days in the years 2000 to 2006, and on a few days in the years 2012, 2015 and 2016, the acquired MODIS data have either only limited coverage, or some of the MODIS data were corrupted during the download process. For these days, the SCFV products are available but have data gaps.

This dataset contains Daily Snow Cover Fraction of viewable snow from AVHRR, produced by the Snow project of the ESA Climate Change Initiative programme. Snow cover fraction viewable (SCFV) indicates the area of snow viewable from space over land surfaces. In forested areas this refers to snow viewable on top of the forest canopy. The SCFV is given in percentage (%) per pixel. The global SCFV product is available at about 5 km pixel size for all land areas, excluding Antarctica and Greenland ice sheets. The coastal zones of Greenland are included. The SCFV time series provides daily products for the period 1982-2019. The product is based on medium resolution optical satellite data from the Advanced Very High Resolution Radiometer (AVHRR). Clouds are masked using the Cloud CCI cloud v3.0 mask product. The retrieval method of the snow_cci SCFV product from AVHRR data has been further developed and improved based on the ESA GlobSnow approach described by Metsämäki et al. (2015) and complemented with a pre-classification module. All cloud free pixels are then used for the snow extent mapping, using spectral bands centred at about 630 nm and 1.61 µm (channel 3a or the reflective part of channel 3b), and an emissive band centred at about 10.8 µm. The snow_cci snow cover mapping algorithm is a two-step approach: first, a strict pre-classification is applied to identify all cloud free pixels which are certainly snow free. For all remaining pixels, the snow_cci SCFV retrieval method is applied. The following auxiliary data set is used for product generation: ESA CCI Land Cover from 2000; water bodies and permanent snow and ice areas are masked based on this dataset. Both classes were separately aggregated to the pixel spacing of the SCF product. Water areas are masked if more than 50 percent of the pixel is classified as water, permanent snow and ice areas are masked if more than 50 percent are identified as such areas in the aggregated map. The SCFV product is aimed to serve the needs for users working in the cryosphere and climate research and monitoring activities, including the detection of variability and trends, climate modelling and aspects of hydrology, meteorology and biology. The Remote Sensing Research Group of the University of Bern is responsible for the SCFV product development and generation. ENVEO developed and prepared all auxiliary data sets used for the product generation. The SCFV AVHRR product comprises one longer data gap of 92 between November 1994 and January 1995, and 16 individual daily gaps, resulting in a 99% data coverage over the entire study period of 38 years.

This dataset contains Daily Snow Cover Fraction (snow on ground) from AVHRR, produced by the Snow project of the ESA Climate Change Initiative programme. Snow cover fraction on ground (SCFG) indicates the area of snow observed from space over land surfaces, in forested areas corrected for the transmissivity of the forest canopy. The SCFG is given in percentage (%) per pixel. The global SCFG product is available at about 5 km pixel size for all land areas, excluding Antarctica and Greenland ice sheets. The coastal zones of Greenland are included. The SCFG time series provides daily products for the period 1982-2019. The product is based on medium resolution optical satellite data from the Advanced Very High Resolution Radiometer (AVHRR). Clouds are masked using the Cloud CCI cloud v3.0 mask product. The retrieval method of the snow_cci SCFG product from AVHRR data has been further developed and improved based on the ESA GlobSnow approach described by Metsämäki et al. (2015) and complemented with a pre-classification module. All cloud free pixels are then used for the snow extent mapping, using spectral bands centred at about 630 nm and 1.61 µm (channel 3a or the reflective part of channel 3b), and an emissive band centred at about 10.8 µm. The snow_cci snow cover mapping algorithm is a two-step approach: first, a strict pre-classification is applied to identify all cloud free pixels which are certainly snow free. For all remaining pixels, the snow_cci SCFG retrieval method is applied. The following auxiliary data sets are used for product generation: i) ESA CCI Land Cover from 2000; water bodies and permanent snow and ice areas are masked based on this dataset. Both classes were separately aggregated to the pixel spacing of the SCF product. Water areas are masked if more than 50 percent of the pixel is classified as water, permanent snow and ice areas are masked if more than 50 percent are identified as such areas in the aggregated map; ii) Forest canopy transmissivity map; this layer is based on the tree cover classes of the ESA CCI Land Cover 2000 data set and the tree cover density map from Landsat data for the year 2000 (Hansen et al., Science, 2013, DOI: 10.1126/science.1244693). This layer is used to apply a forest canopy correction and estimate in forested areas the fractional snow cover on ground. The SCFG product is aimed to serve the needs of users working in cryosphere and climate research and monitoring activities, including the detection of variability and trends, climate modelling and aspects of hydrology, meteorology, and biology. The Remote Sensing Research Group of the University of Bern is responsible for the SCFG product development and generation. ENVEO developed and prepared all auxiliary data sets used for the product generation. The SCFG AVHRR product comprises one longer data gap of 92 between November 1994 and January 1995, and 16 individual daily gaps, resulting in a 99% data coverage over the entire study period of 38 years.